Ultraprobe® 2000 Accessories
The following accessories are typically used with the Ultraprobe® 2000.
Ultraprobe® 2000 Accessories
The following accessories are typically used with the Ultraprobe® 2000.
CONSTRUCTION: Hand held metered pistol type made with anodized aluminum and ABS plastic
FREQUENCY RESPONSE: Detect ultrasonic frequencies between 20 kHz and 100kHz, continuously variable. Frequencies are converted to 100 Hz to 3 kHz audio.
PROBES:
Scanning Module: patented TRISONIC plug-in type consisting of a phased array of multiple transducers for airborne ultrasound. This probe is shielded against RF interface.
Rubber Focusing Probe (flexible) slips over scanning module to concentrate conical directivity and to shield reception of stray ultrasound. Also fits over Stethoscope Module to shield against high ambient ultrasound while unit is at maximum sensitivity.
Stethoscope Module: plug-in type, insulated probe with RF shielding; 4 1/2″ (11.4 cm) long steel probe tip, conically shaped for uniform surface contact. Probe tip is interchangeable. Stethoscope Extension Kit: 3 piece, segmented metal rods to increase stethoscope contact range 20″ (50.8.cm) and 31″ (76.2 cm).
TRANSMITTER: Patented warble tone transmission
HEADSET: Noise isolating type: double headset wired monophonic, impedance, 16 ohms. Over 23 dB of noise attenuation. Meets or exceeds ANSI specification and OSHA standards.
INDICATORS: Ballistic output meter: linear calibration scale of 0-100 for logging relative measurements. Meter is accurate 1% throughout entire scale. Low level Battery LED indicator for main housing internal power supply.
BATTERIES: Self contained nickel-cadmium rechargeable. RECHARGING SYSTEM: Standard 110V. Also available in 220V.
FEATURES:
OVER-ALL SIZE: Complete kit in Zero Haliburton aluminum carrying case: 15″ x 22″ x 7″ (38.1 x 55.9 x 17.8 cm). Pistol unit 2 lbs (.9kg). Complete carrying case: 14 lbs (6.4 kg).
SENSITIVITY: Detects .005″ (.127 mm) dia. leak @ 5 psi (.34 bar) at a distance of 50 ft
(15.24 m).
THRESHOLD*: 1 X 10-² 1 X 10-³ std. cc/sec. freon
WARRANTY: 5 Years parts/labor
*depends on configuration
ULTRAPROBE 2000 KIT: Meets and exceeds ASTM E1002-93 requirements for Leak Detection.
GOVERNMENT CODES
NSN: 6635-01-156-3927
FSCM (CAGE) Code: 59202
Table of Allowance #s:
788, 404, 576, 583, 607
Covered by one or more of the following patents: 4416145, EP015115, 502674183
Factory Mutual System Approved
Intrinsically Safe, Class 1, Division I, Groups A, B, C & D
American Buerau of Shipping (ABS) TYPE APPROVAL 95-NY-166-X
UE Systems is committed to continual product improvement therefore Ultraprobe 2000 specifications are subject to change without notice. Warranty details are available by request.
Ultraprobe® 2000 Ultrasonic Detection Kit
Complete with everything you need to for accurate route inspection, the Ultraprobe® 2000 kit includes:
ULTRAPROBE housing with Metered Pistol Grip, Ballistic Meter, Frequency Tuning Dial, Ten Turn Potentiometer, Numerically Calibrated Sensitivity Dial with Selection Lock, Bi-Modal Meter Selector switch, battery, battery indicator light, battery recharger receptacle and head set receptacle.
FACTORY MUTUAL RATED
Ultraprobe® 100 Instrument Accessories
Ultraprobe® 100 Ultrasonic Detection Kit
It’s easy to find the right Ultraprobe 100 for your application
AVAILABLE KITS AND ORDERING INFORMATION
UP100KT: ULTRAPROBE 100 KIT
UP100 pistol housing with LED bar graph meter, 8 position sensitivity selection, low battery indicator, scanning module, rubber focusing probe, stethoscope module, warble tone generator with battery recharger, lightweight foam lined headset, 9 volt alkaline battery (replaceable), cordura/nylon soft pack and comprehensive instruction manual.
UP100SC: ULTRAPROBE 100 STETHOSCOPE / SCANNER KIT
UP100 pistol housing with LED bar graph meter, 8 position sensitivity selection, low battery indicator, scanning module, rubber focusing probe, stethoscope module, lightweight foam lined headset, 9 volt alkaline battery (replaceable), cordura/nylon soft pack and comprehensive instruction manual.
UP100STG: ULTRAPROBE 100 SCANNER / TONE GENERATOR KIT
UP100 pistol housing with LED bar graph meter, 8 position sensitivity selection, low battery indicator, scanning module, rubber focusing probe, warble tone generator with battery recharger, lightweight foam lined headset, 9 volt alkaline battery recharger (replaceable), cordura/nylon soft pack and comprehensive instruction manual.
UP100C: ULTRAPROBE 100 STETHOSCOPE KIT
UP100 pistol housing with LED bar graph meter, 8 position sensitivity selection, low battery indicator, stethoscope module, lightweight foam lined headset, 9 volt alkaline battery (replaceable), cordura/nylon soft pack and comprehensive instruction manual.
UP100S: ULTRAPROBE 100 SCANNER KIT
UP100 pistol housing with LED bar graph meter, 8 position sensitivity selection, low battery indicator, scanning module, rubber focusing probe, lightweight foam lined headset, 9 volt alkaline battery (replaceable), cordura/nylon soft pack and comprehensive instruction manual.
Construction: Handheld ABS pistol type ultrasonic processor, stainless steel sensor enclosures
Circuitry: SMD/Solid State hybrid heterodyne receiver
Frequency Range: 35-45 kHz
Indicator: 10 segment LED bargraph (red)
Sensitivity Selection: 8 position precision attenuation
Power: 9 Volt Alkaline Battery
Low Battery Voltage Indicator: LED
Headset: Noise isolating type: double headset wired monophonic impedance; 16 ohms. Over 23 dB noise attenuation. Meets or exceeds ANSI specification and OSHA standards.
Probes: Scanning Module (SCM-1) Stainless Steel Unisonic (single transducer) piezo electric crystal type; Stethoscope/Contact Module (STM-1) Stainless Steel plug-in type with 5.5? Stainless Steel Waveguide.
Rubber Focusing Probe: Shields stray ultrasonic signals & focuses detected signals.
Transmitter: Patented warble tone transmission
Response Time: 300 m. sec.
Ambient Operating Temperature Range: 32°-120°F(0°-50°C)
Relative Humidity: 10-95% non condensing at up to 86°F(30°C)
Storage Temperature: 0°-130°F (-18°-54°C)
Warranty: One year, parts/labor. (Details available on request)
Dimensions: 5.25″ x 2″ x 8″ (13.3cm x 5cm x 20.3cm)
Weight: 11 oz (.3kg)
Carrying Case: Nylon soft carry case with die cut foam
*In an effort to provide the highest quality, Ultraprobe 100 specifications are subject to change without notice.
Intrinsically safe test equipment is a requirement for workplaces where combustible gasses may be present. Prior to performing an infrared inspection in such areas, it is important to understand the meaning and importance of this requirement.
Experienced thermographers know that image clarity is one of the most important considerations in thermal imaging. For thermal imagers, imager frame rate is an important characteristic that can greatly influence image quality.
Airborne and Structure-borne ultrasound have evolved into a technology that many would consider to be the cornerstone of an effective maintenance and reliability program.
Shipping infrared equipment is a frequent necessity for thermographers. Taking the time to make certain that equipment is adequately insured can help prevent bigger problems in the event of loss or damage.