Ultraprobe 100 Specifications

 

Ultraprobe 100 Specifications are as follows

Construction: Handheld ABS pistol type ultrasonic processor, stainless steel sensor enclosures

Circuitry: SMD/Solid State hybrid heterodyne receiver

Frequency Range: 35-45 kHz

Indicator: 10 segment LED bargraph (red)

Sensitivity Selection: 8 position precision attenuation

Power: 9 Volt Alkaline Battery

Low Battery Voltage Indicator: LED

Headset: Noise isolating type: double headset wired monophonic impedance; 16 ohms. Over 23 dB noise attenuation. Meets or exceeds ANSI specification and OSHA standards.

Probes: Scanning Module (SCM-1) Stainless Steel Unisonic (single transducer) piezo electric crystal type; Stethoscope/Contact Module (STM-1) Stainless Steel plug-in type with 5.5? Stainless Steel Waveguide.

Rubber Focusing Probe: Shields stray ultrasonic signals & focuses detected signals.

Transmitter: Patented warble tone transmission

Response Time: 300 m. sec.

Ambient Operating Temperature Range: 32°-120°F(0°-50°C)

Relative Humidity: 10-95% non condensing at up to 86°F(30°C)

Storage Temperature: 0°-130°F (-18°-54°C)

Warranty: One year, parts/labor. (Details available on request)

Dimensions: 5.25″ x 2″ x 8″ (13.3cm x 5cm x 20.3cm)

Weight: 11 oz (.3kg)

Carrying Case: Nylon soft carry case with die cut foam

*In an effort to provide the highest quality, Ultraprobe 100 specifications are subject to change without notice.